I am having difficult uploading to my SDS200 the programming data from ProScan (I have the most recent update on my computer). Cannot establish connection, no COM port showing up. Using Windows 11, and read somewhere that Windows 11 no longer supports COM port connections, but that is the sole method for communicating between software on computer and the radio SD card.. Last week I was able to update SDS firmware using Sentinel which found a COM port. Why is my ProScan unable to establish a communication with the scanner; I have a USB cable running to the mini USB socket on the radio.
ProScan: COM Port Issue
- Thread starter K3JTP
- Start date
jtwalker
Member
ProScan doesn’t use the com port to read/write programming with an SDS scanner. Scanner must be in mass storage mode to do this.
If you want to use ProScan for reading & writing the favorites then put the scanner in Mass Storage mode. The SDS200 has FTP cabibilies so the FTP read & write will work too.
If you want to use ProScan for the virtual display, or logging then put the scanner in Serial Port mode (normal operation or other then Mass Storage mode)
Possibly you may find help in this thread:
forums.radioreference.com
SDS100/SDS200: - SDS200 µSD Card Issue or Sentinel Issue or Something Else?!
Well this is weird from the usual "corruption" / µSD card issue I've seen here... And before we say "just replace the microSD card" - I'm not convinced that's the problem. This may take a minute to explain. Background: I simply wanted to make an edit (remove a couple of channels). I fired up...
Similar threads
